71x28x71 mm MT-530 Three outputs: one for temperature control, another for humidity control, and a third one for auxiliary purposes which may operate as a second stage for temperature control, second stage for humidity control, or as a cyclic timer. Additionally, MT-530 is capable of monitoring output status, against an user-configurable time, to warn if the controlled variable is not reaching the configured value, which may be an indication of improperly dimensioned or faulty equipment. It also features an internal audible alarm (buzzer). It has a serial communication for connection to Sitrad. Application example: data centers and general-ambient air conditioning. » Product manual

71x28x71 mm AHC-80 It measures air moisture based on psychometrics (dry bulb and wet bulb). It features an integrated temperature controller, and allows configuring for dual-stage of humidity. It operates in the range from 40 to 100% RH and from –5 to 50 °C. It has a serial communication for connection to Sitrad. Application example: air conditioning and storage of fruits and flowers. » Product manual

220x134x54 mm Humitech Super Temperature and humidity digital controller for poultry farming. It is able to control up to eight groups of fans besides minimum ventilation. It commands two spray stages and one for cooling, also featuring hot and cold automatic switch and two alarm outputs for out of range temperature and lack of voltage/curtain disarm. It has an internal memory to continuously record the temperature and humidity values, alarms, output status besides many other informations at users configurable intervals. Additionally is has an USB port allowing to download the recorded data directly to a portable storage device (pen drive). It also has an automatic relative control parameters, just by adjusting the desired temperature and all stages are automatically set (relative setpoints). It allows independent programming of temperature and duration (in days) for each phase of the batch. Optionally the Humitech %uper can read the temperature in two different points of the poultry farm, performing the control based on the average temperature between the two sensors. It has a serial communication for connection to Sitrad. » Product manual

97x148x55 mm HUMITECH III It controls up to four groups of fans, besides the minimum ventilation. it features controls for two nebulization stages, one for cooling (with shutdown in case of high humidity), and another for humidifying (in case of low humidity). besides, it features automatic cold/warm, and the possibility to operate the heating control together with cooling stages. Application example: chicken coop and pig farming. » Product manual

97,3x148x54,6 mm HUMITECH II With temperature and humidity sensors, it simultaneously controls up to three fan groups, gas exhaust system, water spray, temperature and power failure alarms, shade opening and closing, and controls the heating system during winter. It features nine relay outputs, being easily installed with DB9 (sensors) and DB15 (control outputs) connectors. It has a serial communication for connection to Sitrad. Application example: poultry and swine nurseries. » Product manual