100x73,5x37 mm ANASOL Economic version of the differential temperature controller for pumped solar heating systems. It features a function to prevent the water from freezing in the pipes, and a 16A relay for direct operation of circulation pumps up to 1 HP. It allows operating them manually or automatically by means of a three-position switch. » Product manual

Ø 60x40mm prof. MICROSOL Differential thermostats for solar heating that control water circulation pumps based on the temperature differential between the solar panels and the thermal tank or swimming pool. It functions ensure better collection of solar power, to prevent water from freezing within the piping during winter, and to control its overheating. » Product manual

71x28x71 mm MICROSOL II Differential solar heating controller featuring three temperature sensors that acts in the activation of the water pump. It functions prevents the water from overheating and the freezing within the pipes. It has two backup outputs, by electric resistance, gas or diesel-fired or even to command the swimming pool filtration. In addition to this, it features a real-time scheduler that allows to set weekly and daily events and permanent internal battery to ensure clock synchronism for many years, even in case of power failure. It has a serial communication for connection to Sitrad. » Product manual

71x28x71 mm MICROSOL R Differential thermostats for solar heating that control water circulation pumps based on the temperature differential between the solar panels and the thermal tank or swimming pool. It functions ensure better collection of solar power, to prevent water from freezing within the piping during winter, and to control its overheating. » Product manual

90x131x28 mm Wall-Fi Consisting of an interface between user and the plus line instruments for application in refrigeration, air conditioning, and solar heating systems, among others. It has a wireless connection which does away with all the inconvenience resulting from cable installation. It has a serial communication for connection to Sitrad. » Product manual

90x131x28 mm Wall-Link Interface to be used combined with Microsol II and Microsol II power. This HID (Human Interface Device) enables easy and quick remote access to all Microsol II information and setup. » Product manual

123x84x34 mm MICROSOL II power It features a versatile switched-mode power supply (90 to 264Vac) and powerful relays (two 16-Amp and one 30-Amp) that directly commands without the need of magnetic contactors motors up to 1HP and electrical resistances up to 7500W. It has two backup outputs, which can be electric, gas powered, diesel-fired or even to set the swimming pool filtration. The output 1 is attached to a weekly schedule allowing to set up to four daily events to each day of the week and the output 2 can be optionally set to bound up with the controller agenda. It features the anti-freeze and overheating functions, which prevents the water from freezing and overheating within the pipes and a clock with internal battery to assure the controller synchronism even in lack of energy events, for many years. The instrument has serial communication to connection with the Wall-Link and Wall-Fi. It has a serial communication for connection to Sitrad.